English
  • English
Home> Articles>News>Diy Lithium Batteries: How To Build Your Own Battery Packs

Diy Lithium Batteries: How To Build Your Own Battery Packs

From:CTECHI GROUP Limited     Release time:2018-10-10

Overview:Do you believe that even portable mobile phone power can also be made at home? And the production method is very simple, and it can be completed in 5 minutes. Not joking. It is true and effective. Though it a little bit less environmentally friendly, it's definitely a good choice for emergency. Because if it's out of power, you don't have to wait for it to be fully charged up before you can use it. You can use it by changing a battery directly.

Diy Lithium Batteries: How To Build Your Own Battery Packs

Diy Lithium Batteries: How To Build Your Own Battery Packs

Do you believe that even portable mobile phone power can also be made at home? And the production method is very simple, and it can be completed in 5 minutes. Not joking. It is true and effective. Though it a little bit less environmentally friendly, it's definitely a good choice for emergency. Because if it's out of power, you don't have to wait for it to be fully charged up before you can use it. You can use it by changing a battery directly.

Diy Lithium Batteries: How To Build Your Own Battery Packs

Homemade portable mobile phone power require materials: a car conversion charger, a battery holder, a beautiful box, and a microphone battery.

Diy Lithium Batteries: How To Build Your Own Battery Packs

We need to take the car conversion charger apart, we just need the USB port that connects the data line inside and the small panels that connect together, and we separate the positive and negative poles.

Diy Lithium Batteries: How To Build Your Own Battery Packs

Then, connect the battery holder to the USB port, the red line is the positive electrode, the black line is the negative electrode, be sure to see clearly, connected to the small panel positive and negative electrode.

Diy Lithium Batteries: How To Build Your Own Battery Packs

Finally, plug in the battery and put the whole device in a beautiful box, preferably a plastic box. Cut a small opening on the edge of the box, then install the USB charging port on the edge of the small opening, then use transparent tape to fix the USB port and battery, and then add a spare battery. Cover the box.

Oh! It works.


About Us

We CTECHI Group is a leading Cr1632 Battery, Cr1616 Battery, Rechargeable D4 Batteries manufacturer and exporter in China, we are not only focus on provide single cell but provide battery assembly and do OEM service for customers, CTECHI has captured 80 percent of overseas markets in the past 16 years with more than 2000 reliable customers in our customer management system, which has been being one of the leading enterprises with the most complete category in China's battery industry.


Message BoardPlease write down your question and we will respond to you within 24 hours.